Basics about darts

Learn about the professional dart board in dart throwing

This type of dartboard is designed with 2 launchers, each surface is equivalent to a different scoring method.

Thickness of about 1.5cm, solid with wooden conductor and very sensitive to darts because the board is covered with a layer of sisal outside. The details are very clear and prominent. International standard 18 inch diameter equivalent to 45cm.

The grating plate helps to divide up the scoring cells, avoiding controversy when you hit between the lines of 10 and 20 points.

Iron-dart darts, the tail is made of thin and light leaves similar to the feathers on the arrows to help darts fly in a straight line, increasing accuracy. A dart board comes with 6 darts to split into 2 different colors for 2 teams.

Here’s how to calculate the score. As mentioned above, the dart board consists of 2 sides with 2 different target provinces.

On the face of the concentric black and white circles, it is easy to know how to calculate the points, the more you dart the closer the center of the score will be, the more you hit the circle will get the corresponding number of points recorded on the round.

Ok, so you guys know how to calculate points. Now let’s learn how to make the most accurate dart launcher.

Holding a dart

The dart fits neatly in the palm of the hand with 4 fingers straightened out, the thumb holds the dart in a fixed position. The tip may point toward the tip of the finger or turn toward the wrist.

If aiming at the target close by, we let the pointed nose stick out of the fingertips a lot and vice versa, we hold the dart with a low tip when we want to throw away.

Above are the basic information about professional dartboard. Hopefully, the article is useful for you when choosing a suitable dartboard.

Basics about darts

The basic darts throwing technique every player should know

First of all, when throwing, hold your wrist upright. If you bend or twist your wrist, the dart’s nose will swirl excessively on its way to the finish line.

Next is the distance from you to the destination. Darts throwing techniques vary depending on the distance or distance. When darts are thrown, they will rotate in a circle before hitting the target. You have to calculate the number of rotation of the dart depending on the distance thrown near or near.

At close range, the dart rotates only half a turn before reaching the finish line. At far distances, the dart will rotate one round or more. If thrown close, pay attention to how to hold the dart with a sharp tip out of the tip of the finger, foot steps to the width, lean forward when throwing, darts will go faster and stronger.

When throwing away, hold the dart lower than when you throw close, stand tall, close carefully before throwing.

When starting to practice, you should stand a few meters near the goal. If you hold the pointed dart towards the tip of the finger, when thrown it will fly straight to the destination, do not rotate.

Then you step back a few more steps. So that you find the appropriate distance for the dart to rotate a full circle before reaching the destination. For an average stature person, that distance is within 4-5m. Keep standing away from the target, find the appropriate distance for 1 and a half rounds, 2 rounds and more.

If you are right-handed, stand with your right foot first, when throwing your left leg.

If the dart hits the target with the tip pointed up, you back up 1 or 2 steps. If the dart hits the target with the nose pointing down, take 1 or 2 steps.

If the dart hits the target with the tail not pointed or sometimes turns the nose up, sometimes swings down, you should pay attention to the wrist, you may have bent your wrist when throwing.

Whenever finding an appropriate distance, mark a standing point or measure the distance. Gradually you’ll get used to estimating and choosing the right distance for each throw. Accuracy will gradually improve through persistent training.

Basics about darts

How is the basic structure of dartboard in dart game?

Before the first world war in England people often made dartboards from elm tree. They soaked them overnight to smooth out the holes caused by darts. That work has become a job for the poor in England.

Later, a company called Nodor invented a new type of dart board made of clay, but the model did not work until someone came up with the idea of ​​making a dart board from sisal.

This type of fiber is really a great success, darts do not have many holes after launch and require little maintenance.

Currently these dart board are made from sisal fiber. The standard dart board is 18 inches (45cm) in diameter. There are 20 sections in a dartboard. Each part is separated by metal wire or 1 thin metal plate. They curled or printed numbers directly on the dartboard.

The original idea of ​​the dart board is very interesting, they are derived from the trunk of the tree with concentric twists. The former name of the dart launcher is “butt”, which means the bottom of the barrel, but its original name is “butte” in French meaning the target.

A carpenter in the Lancashire region named Brian Gamlin created the current layout of the 20 scoring areas in the early days of 1896.

However, there are many other points layout that have been used for many years. in different geographical locations. Gamlin’s layout penalize incorrect rates, generating random throws.

Although this applies to most boards, beginners prefer the left side (near point 14), where the focus of large numbers is. Mathematically, eliminate rotational symmetry by putting point “20 ″ at the top of the board, with score 1 9.

Various layouts will penalize points more than the current setting, however, the current setup is actually quite effective. There have been a number of published mathematical papers to review the “optimal” layout dartboard score to go to the best standard today.